circon - M12 Ethernet Connectors

INELCO's circular connectors are made for Ethernet data communications in industrial environment up to IP67.
INELCO fulfills all requirements given by the IEC Standard IEC 61076-2-101 for M12  connectors with  screw-locking for low voltage application.

The 4 pole connector is designed for use in industrial environment at frequencies of 100 MHz and beyond like Industrial Ethernet.
The 5 pole connector is designed for use in
industrial environment in fieldbuses like Profibus DP and Interbus.

 

 

Download Area:

circon M12 overview

M12 assembly

circon M12 data sheets

 

M124FS1
female M12 (4 pin) for soldering cable assembly
M124FS2
female M12 (4 pin) M124FS1 with big screw
M124FW2B
female M12 (4 pin) for wire to board assembly
M124MW2B
male M12 (4 pin) for wire to board assembly
M124MSP
male M12 (4 pin)
PCB-Type for solder
M124MS1
male M12 (4 pin) for soldering cable assembly
M125FS1
female M12 (5 pin) for soldering cable assembly
M125FS2
female M12 (5 pin) M125FS1 with big screw
M125FW2B
female M12 (5 pin) for wire to board assembly
M125MW2B
male M12 (5 pin) for wire to board assembly
M125MSP
female M12 (5 pin) PCB-Type for solder
M125MS1
male M12 (5 pin) for soldering cable assembly

© 2010 INELCO / ISC - all rights reserved